Search results for "Wood flour"
showing 10 items of 13 documents
Conifer Needles as Thermoplastic Composite Fillers: Structure and Properties
2016
This study describes the properties of thermoplastic polymer composites based on polyethylene (of low and high density) and ethylene-propylene copolymers using various types of conifer needles (pine, spruce, fir, and cedar) as fillers. For the needles, thermogravimetric analysis (TGA) and TGA/Fourier transform infrared spectroscopy (TGA/FTIR) were performed to investigate their structures and thermal resistance, as required for the composite processing methods. Moreover, structural differences were studied for the analyzed fillers and composite materials (FTIR). The results were compared with the values obtained for composites with conifer wood flour. Composites with conifer needles (pine) …
Effect of the processing techniques on the properties of ecocomposites based on vegetable oil-derived Mater-Bi® and wood flour
2009
Polymer composites based on biodegradable polymers and natural-organic fillers are becoming more and more important because of their interesting properties in terms of environmental impact, manufacturing cost, and esthetic features. In particular, the use of biodegradable polymer matrices allows obtaining a full biodegradability. One of the most interesting biodegradable polymer families is the Mater-Bi® one. In this work, we investigated the processability, the influence of different processing techniques, and the influence of the filler particle size on the properties of Mater-Bi/wood flour composites. Injection molding caused a partial degradation of the macromolecular chains, whereas si…
Mechanical, Thermomechanical and Reprocessing Behavior of Green Composites from Biodegradable Polymer and Wood Flour
2015
The rising concerns in terms of environmental protection and the search for more versatile polymer-based materials have led to an increasing interest in the use of polymer composites filled with natural organic fillers (biodegradable and/or coming from renewable resources) as a replacement for traditional mineral inorganic fillers. At the same time, the recycling of polymers is still of fundamental importance in order to optimize the utilization of available resources, reducing the environmental impact related to the life cycle of polymer-based items. Green composites from biopolymer matrix and wood flour were prepared and the investigation focused on several issues, such as the effect of r…
Effect of adding wood flour to the physical properties of a biodegradable polymer
2008
Wood flour/polymer composites (WPC) gained a significant interest during the last decades, due to several advantages related to the use of a natural-organic filler rather than an inorganic-mineral one. However, most of the studies have been performed on composites based on polyolefin matrices. A further step is the use of biodegradable polymers instead of traditional ones. In this work, wood flour (WF), under the form of short fibers, with two different sizes (coarse and fine) was added to a corn starch based biodegradable polymer of the Mater-Bi family. The effect of WF size, WF content, thermal treatment on the mechanical properties was investigated. The tensile mechanical tests showed an…
DEGRADATION OF MATER-BI /WOOD FLOUR BIOCOMPOSITES IN ACTIVE SEWAGE SLUDGE
2009
The mechanical properties of Mater-Bi® are, in general, not adequate for certain applications and the addition of a filler is therefore necessary. Among the different fillers, natural fibres are particularly interesting because they potentially allow improving the performance of the material without compromising its biodegradability. In order to improve the basic mechanical properties of a Mater-Bi grade and to obtain a new, fully biodegradable material, wood flour based composites were prepared by different processing methods. To simulate actual and not laboratory bacterial attack on the prepared materials, in this work we studied the biodegradation of the composites in a real active sewag…
Accelerated weathering of polypropylene/wood flour composites
2008
Abstract Wood–plastic composites (WPCs) have received increasing attention during the last decades, because of many advantages related to their use. Some of their main applications are represented by outdoor furnishing and decking; therefore, it is important to assess their behaviour under UV exposure. In this work, polypropylene/wood flour composites were prepared and their resistance to photooxidation investigated. The composites were prepared by extrusion and compression moulding, and were subjected to mechanical tests, FTIR analysis and molecular weight measurements. The results showed that the composites retained a higher fraction of the original mechanical properties after accelerated…
Effect of the processing on the properties of biopolymer based composites filled with wood flour
2008
Wood-polymer composites (WPCs) are well known today in the field of industrial applications, because of several advantages they can grant if compared with mineral filler-polymer composites. These advantages regard the low cost of wood based fillers, the reduced specific weight, the lower hazards for production workers in case of inhalation, the special aesthetic features, environmental issues. The scientific literature reports studies regarding polymer matrices like, for instance, polyethylene and polypropylene, in combination with several natural-organic fillers. However, a limit of these composites is represented by the fact that there is not a full biodegradability: this, in fact, regard…
Fast-growing willow (Salix viminalis) as a filler in polyethylene composites
2018
Abstract The study investigated the possibility of using wood flour obtained from fast-growing willow chips (Salix viminalis) as an alternative for standard hard- and softwood flours used in the production of wood polymer composites (WPCs). The composites contained willow flour and polyethylene matrix (OPCs) were prepared, characterized and compared with other WPCs which had been filled with hard- or softwood flours. Moreover, the structural and functional properties were investigated and discussed. Greater hemicellulose contents and lower lignin contents in OPCs resulted in better impact strength values of those materials. Which is interesting, the chemical composition of OPCs was found si…
Mechanical behaviour of Mater-Bi/wood flour composites: a statistical approach
2008
Interest in biocomposites (lignocellulosic filled biopolymers) started in the 90s, due to environmental advantages, related to the full biodegradability of both matrix and filler, economical issues (organic fillers usually come from sawmill or agriculture wastes) and aesthetical issues (wood filled biopolymers could be particularly pleasant if used for indoor furnishing and automotive interior). In this work, a method for a systematic study of the properties of Mater-Bi®/wood flour composites is presented. A two-level full factorial model was built. It allows investigating the effects of multiple operative variables on the observed properties, their contributions, their optimal combinations…
Mechanical properties of recycled polyethylene ecocomposites filled with natural organic fillers
2006
The use of natural organic fillers in addition to postconsumer recycled polymers is getting a growing interest during the last years; this is due to many advantages they can provide in terms of cost, aesthetic properties, environmental impact. In this work, several types of wood flour (differing each other with regard to production source and particle size) were added to a recycled polyethylene coming from films for greenhouses and the effects of filler type, content, and size were investigated. Investigation was then focused on the improvement of mechanical properties, through the addition of polar copolymers (ethylene-co-acrylic acid, ethylene-vinyl acetate) and a maleic anhydride-grafted…